Thanks all, they are 5/16 x 18. It had been awhile since they were last
chased, if ever, it was a very tight fit, which is why I asked.
I've got another thread question. I am using a mechanical Auto Meter
water temperature gauge and need to know what those threads are in the
thermostat housing where the stock temperature bulb (sending unit TR4)
screws in. I think it is a 3/8" NPT and if so I think I need Auto Meter
part number 2263 to screw in there. Can anyone confirm?
Thanks,
Greg
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Greg & Alison Blake
Sent: Sunday, February 01, 2009 4:40 PM
To: fot@autox.team.net
Subject: [Fot] TR3 timing cover bolt threads
Stupid question, but what are these threads? I was cleaning up all the
treads on my block and the 1/4x20 tap seems slightly small.
Thanks,
Greg
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|