Steve,
The later TR3s had split steering shafts.B If yours is a solid one piece I
would look for a later gearbox with the slit column.B Much eaiser to work on
as well..B
Brad
-----Original Message-----
From: "steve belfer" <colordog.1@earthlink.net>
Sent 12/8/2008 4:57:57 PM
To: fot@autox.team.net
Subject: [Fot] Tr3 steering shaftI'm about to get a quick release steering
wheel shaft welded to my existing steering shaft. The part that was ordered
is bigger in diameter than the shaft itself. Does this mean I could not ever
fix the steering box, should the need arise because the shaft pulls out from
the front? Do I need to get a quick release unit with an end that's the same
dia. As the shaft and not bigger?
Steve
Sent via BlackBerry from T-Mobile
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|