Jerry,
According to the Triumphtune Manual they springs are as follows,
Fronts
TR4A/TR5/TR6
312 lbs, 6.75" fitted length
Rears
TR4A 280 lbs 8.2" fitted length
TR5 320 lbs 8.4" fitted length
TR6 late 354 lbs 8.81 fitted length
That last spring shows to raise the ride height to 9.0 in a TR4A
Hope that helps,
Bob Kramer, Austin Texas
rkramer3@austin.rr.com
----- Original Message -----
From: "Jerry Van Vlack" <jerryvv@roadrunner.com>
To: <edwardbarnard@prodigy.net>; "FOT" <fot@autox.team.net>
Sent: Thursday, November 13, 2008 6:22 PM
Subject: Re: [Fot] Spring rates
> How about the stock rates for a TR4A IRS and how they differ for a TR250
> and a TR6. I'd like to use Goodparts stuff on my 4A and suspect it would
> be fine to do so but I'd sure like to get some council from a been there
> and done that person. Not track; mainly road use.
> JVV
>
> ----- Original Message -----
> From: "EDWARD BARNARD" <edwardbarnard@prodigy.net>
> To: "FOT" <fot@autox.team.net>
> Sent: Thursday, November 13, 2008 1:17 AM
> Subject: [Fot] Spring rates
>
>
>> Lister's:
>> Does anyone on the list know what the spring rates are for a stock set of
>> springs for both the Spitfire and the GT6.
>> Thanks - Ed -
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|