....and suppose you have an overdrive unit?
With a locked or welded diff you don't do multiplication by two. I
find it simpler and more accurate to do ten rotations of the tire--no
interpolation. 37 output shaft turns vs. 39. Not a lot of room for
error there. I just had to do it for the Ambro.
On Oct 20, 2008, at 12:31 PM, Ted Schumacher wrote:
> Bobby, tried to reply last night and not sure if reply got through.
> Here we go again. Apologies for sending twice if it did get through.
> This will only work for "open", not welded or limited slip,
> differential. Put a mark on the pinion (drive shaft) flange and a
> mark
> on one wheel (or tire or brake drum). Keep the other wheel, tire,
> etc.from turning. Turn the drive shaft and count the number of turns
> of
> the pinion flange needed to get 1 revolution of the tire. Multiply
> this
> by 2 and you have the ratio. Example - just over 2 turns is a 4.1,
> just
> under 4 turns is a 3.9, 1 3/4 turns is a 3.5, etc. All you have to
> do is
> know what ratios were available. The example of 1 3/4 turns as a
> 3.5 is
> not quite correct. Triumph did not make a 3.5, but they did make a
> 3.45. That's one method - no tools, no fuss, no dismantling. Ted
>
> Bobby Whitehead wrote:
>> Forgot to mention... I have several differentials laying around. I
>> don't have them in the car. I have known and determined I have a
>> 3:89 locked in the GT6. If I indeed DO have a 4:11 I need to
>> understand how to figure it out without being in the car.
>>
>> Thanks guys....
>>
>> Bobby Whitehead
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> http://www.fot-racing.com
>>
>> Fot mailing list
>> Fot@autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - http://www.avg.com
>> Version: 8.0.173 / Virus Database: 270.8.1/1733 - Release Date:
>> 10/19/2008 6:02 PM
>>
>>
>
>
> --
> Ted Schumacher
> tedtsimx@bright.net
> http://www.tsimportedautomotive.com
> 108 S. Jefferson St.
> Pandora, Ohio, USA 45877
> Fax: 419.384.3272 (24 Hrs.)
> Phone: 800.543.6648 (US & Canada)
> Tech/ Gen. Information/ Worldwide: 419.384.3022
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
Bill Babcock
Babcock & Jenkins
Billb@bnj.com
503.936.7660
www.bnj.com
Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal
Bill@kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|