fot
[Top] [All Lists]

Re: [Fot] hardened washers

To: <Guyots3@wmconnect.com>, <fot@autox.team.net>
Subject: Re: [Fot] hardened washers
From: "riverside" <riverside@cedar-rapids.net>
Date: Wed, 9 Jul 2008 11:25:49 -0500
Caterpillar has some hardened washers and sell
in slmall quantity at the local dealer.

art de armond
----- Original Message ----- 
From: <Guyots3@wmconnect.com>
To: <fot@autox.team.net>
Cc: "Ryan Murphy" <rpm724@att.net>; <Ryan.Murphy@fdlco.wi.gov>
Sent: Wednesday, July 09, 2008 10:31 AM
Subject: Re: [Fot] hardened washers


> In a message dated 7/8/2008 5:15:56 PM Pacific Daylight Time,
> fot-request@autox.team.net writes:
>
>> To: "'FOT'" <fot@autox.team.net>
>> Cc: Ryan Murphy <rpm724@att.net>,    "Ryan Murphy \(work\)"
>>     <Ryan.Murphy@fdlco.wi.gov>
>>
>> I'm looking for hardened and ground washers for the cylinder head nuts 
>> and
>> the
>> rocker stud nuts.  Been reading Carroll Smith's book on fasteners and he
>> makes
>> sense to use these washers in this application, especially the cylinder 
>> head
>> which has spot faced locations for the washers.  I have washer from Moss 
>> but
>> they all are "crushed" and obviously not very hard.  (Checked with a file 
>> and
>> they are just plain washers as far as I can tell, the right size though,
>> almost.)  On the rocker studs, I had used double Gr. 8 washers and they 
>> still
>> got "dished" into the rocker pedestal holes.  I'm wondering if some of 
>> the
>> rocker pedestal stud breakage is from not having a good hardened and 
>> ground
>> washer under the nut and the nut loosing it's tension and/or bending 
>> causing
>> the breakage that has been reported.  This has probably been discussed 
>> and
>> maybe everyone is already using these type of washers.  I'm still pretty 
>> new
>> at this and still have a lot to learn.
>>
>> Would appreciate anyone who has a source for these type of washers in the
>> size
>> needed.  Did the usual Google thing and haven't come up with a supplier 
>> who
>> would sell just 20 or so.
>>
>> Thanks,
>> Tim
>> 1961 TR4 #317
>
> Tim,
>
> ARP or Coast Fabrications both supply such washers, you will need
> measurements when ordering, including thickness.
>
> Also get their catalogs.
>
> Leon
>
> <A 
> 
>HREF="http://community.webshots.com/user/vitesse1963";>http://community.webshots.com/user/vitesse1963</A>
>
>
>   </HTML>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.4.6/1540 - Release Date: 7/8/2008 
> 6:33 AM
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>