I am wondering why you would want to run a dual points distributor with an
MSD unit. All you need is a trgger for the MSD and one set of points is ok
for that. Personally, I converted my Spit over to a pertronix when I
startedusing the MSD. I found that it was much better (or perhaps reliable)
than using points.
Just my humble opinion.
Joe C.
----- Original Message -----
From: <chasgee@aol.com>
To: <hottr6@hotmail.com>; <s.janzen@comcast.net>
Cc: <fot@autox.team.net>
Sent: Tuesday, July 01, 2008 12:39 PM
Subject: Re: [Fot] Mallory dual point trouble-shooting
> Not true.? I've run a dual point for 15 years with an MSD box.
>
> Chuck
> Spitfire Racer
>
>
> -----Original Message-----
> From: Shane Ingate <hottr6@hotmail.com>
> To: s.janzen@comcast.net
> Cc: Friends of Triumph <fot@autox.team.net>
> Sent: Tue, 1 Jul 2008 10:09 am
> Subject: Re: [Fot] Mallory dual point trouble-shooting
>
>
>
> Scott Janzen asked:
>
> > My GT6 has a one year old dual point in it with mechanical advance. It
> runs
> > great when only the leading set of points are connected. When I connect
> the
> > second set, it barely idles and breaks up through the rpm range
>
> Are you running an ignition box like an MSD? If so, you can only
> run one set of points.
>
> Shane Ingate in NM
>
>
> _________________________________________________________________
> Its a talkathon but its not just talk.
> http://www.imtalkathon.com/?source=EML_WLH_Talkathon_JustTalk
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as chasgee@aol.com
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as spitlist@cox.net
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|