In a message dated 5/11/08 2:00:53 PM Pacific Daylight Time, SpiwakD@aol.com
writes:
<< I want a baffled oil pan for my TR3. Who makes them or who knows where to
put the baffles and what size flow holes? >>
My baffled oil pan is not very fancy. I added two baffles at two different
levels in the front of a stock oil pan, based on Greg Solow's recommendations.
I anchored them from the windage plate using 1/4" all-thread rods.
I believe that most of my recent reliability has come from the following:
-Using Greg's flat faced oil pump pickup, with the screen on the bottom.
(Pain pulling off the oil pan from underneath the car, but doable.)
-Installing his oil cooler sandwich, and placing the oil cooler in front of
the radiator.
-Connecting the accusump to the center oil galley port.
I know. There are all sorts of fancy baffled oil sumps out there with trap
doors (which can stick).
**************
Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|