Shane,
I attached the photos of the the Clubman seats installed in my 6. I
think the seats you tried must be a different model from mine or Corbeau
has changed them. I did offset them to the center of the car as much as
possible but moving the polar moment closer to the center of the car is
always good.
Greg Lund
Shane Ingate wrote:
> Greg Lund wrote:
>
>> Corbeau Clubman seats fit easily and weigh about 18 lbs. Street
>> seats have plenty of "road holding weight".
>
> I tried fitting Corbeau Clubmans before going with the 914 seats.
> I found that the shoulder "ears" (or whatever you call those
> things that keep your upper body in place) fouled with the B post.
> The only way around it was to move the seat inwards towards the
> driveshaft tunnel (which increases the offset to the pedals) or
> bending the "ear" to provide clearance. I did not want to own
> the seats, so I did not do the bendy-thing.
>
> There is zero chance of fitting Corbeau Clubmans (I tried the "narrow"
> style - there is a larger version for those with larger posteriors)
> in both driver and passenger locations, again because of interference
> between the "ears".
>
> Kirkey aluminum seats fit well, but are lousy for those 500-mile days.
>
> Shane Ingate in NM
>
>
> _________________________________________________________________
> With Windows Live for mobile, your contacts travel with you.
>
>http://www.windowslive.com/mobile/overview.html?ocid=TXT_TAGLM_WL_Refresh_mobile_052008
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|