I would try to determine why the pushrod wandered off the rocker. One
possibility is that it became fatigued and bent during the race. I know that
the earlier narrow ones were upgraded in diameter because they tended to bend.
In that case I would replace them all with new ss ones. Or perhaps it was
adjusted too loose and wandered (or tight, and bent).
Either way, I would not think it wise to race on a once bent pushrod. Seems
like that would be asking for disaster after having miraculously avoided it!
Steve P.
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|