fot
[Top] [All Lists]

Re: [Fot] TR4 to 4A/6 Lower Trunnion Conversion

To: "Peter Vucinic" <pvucinic@netspace.net.au>, "FOT"
Subject: Re: [Fot] TR4 to 4A/6 Lower Trunnion Conversion
From: emanteno@comcast.net
Date: Fri, 25 Apr 2008 12:39:10 +0000
-------------- Original message -------------- 
From: "Peter Vucinic" <pvucinic@netspace.net.au> 

> Dear Listers, 
> 
> 
> 
> Can anyone tell me what the major hurdles are in converting TR4 3deg lower 
> Trunnion (Shaft pressed into Trunnion), to the TR4A/6 style 3deg lower 
> Trunnions (Takes bolt)? 

At the very least, you will need 4A-6 vertical links to go with those 
trunnions. The later trunnions and vertical links are sided. In other words, 
they do not use the same pieces on each side of the car.
HTH,
Irv Korey
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot


<Prev in Thread] Current Thread [Next in Thread>