I went to the machine shop that I use with a head and went thru his assortment
of valve shims until I found the diameters that fit. I shim mine about 0.080
to 0.100 to inches and at that height the spring will slide out of the seat
pockets. I buy some seats with a retainer (on the inside) and then machine
them on my lathe to fit the seat pocket. This keeps everything in place
nicely. Joe(B)
-- "Greg & Alison Blake" <ablake2@austin.rr.com> wrote:
What do you use for shims to adjust the vale spring pressure? I have
not seen any for sale?
Thanks,
Greg
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
You are subscribed as jaboruch@netzero.net
_____________________________________________________________
Keep your home running smoothly with great home automation solutions! Click
now!
http://thirdpartyoffers.netzero.net/TGL2211/fc/REAK6ZqW8fV4pxqpPOaxa0XYMCK0CI
esknqXSEx4WghOAegHkiRcHQ/
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|