I run 1/16th toe out on my TR3 (which is almost as wide as a TR4). If I run
more than that it can be darty under hard braking. I did run about an inch of
toe out once (long story) and I went very fast that race. It did, however,
cord the inside edge of the tires, so I did not run that setting anymore.
Joe(B)
-- DennisR380@aol.com wrote:
I had to pull my steering rack for a rebuild so I need to string the car to
set the toe when I reassemble. Anybody have a suggestion as to how much total
front toe-out to put on a TR4 race car? I have the factory manual but there
are
no toe numbers given for stock, or otherwise. I'm thinking 1/8" total
toe-out...or?
Dennis
**************
The year's hottest artists on the red carpet at the
Grammy Awards. Go to AOL Music.
(http://music.aol.com/grammys?NCID=aolcmp00300000002565)
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_____________________________________________________________
Begin a career in graphic design. Click here for free information.
http://thirdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijlVUVOAJ5c3EgcKk7U9xoSoT
6hs1vYrCIUd05OuNLkA5KxvN/
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|