> I would quite happy with a
> relative reading
> (such one quarter is really one half) so I feel sure this
> gauge will work
> but just checking to see if anyone has had any experience
> with this sort of
> thing.
If zero ohms is empty, then your TR6 gauge is going to work backwards. It
expects 0 to be full.
Don't recall what empty is offhand, but I think it's less than 90 ...
meaning the gauge will read empty while you still have gas.
One solution might be to fit a TR3 gauge, which expects 0 to be empty.
Randall
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|