My GT6 has an ATI damper that Randy Lamp adapted to my car, originally
designed for a Ford straight six motor. Runs great and smooth. I have a
Jones Racing toothed belt pulley bolted on the front that drives the WP and
alternator. It is a snug fit in the GT6 - not much clearance to radiator
and offset electric fan.
----- Original Message -----
From: "Richard Good" <goodparts@verizon.net>
To: "Chuck Arnold" <triosan@gmail.com>
Cc: "Friends" <fot@autox.team.net>; "Triumph" <6pack@autox.team.net>
Sent: Monday, February 04, 2008 3:50 PM
Subject: Re: [Fot] [6pack] Aftermarket damper for TR6
>I have ATI Super Damper's in stock that I have made to fit the TR6. I
> will soon have the batch of aluminum pulleys done to complete the kits.
> The kit will include the damper, choice of fan extension or replacer
> washer & bolt, crank pulley, new water pump with aluminum pulley,
> alternator pulley and belt. Complete kit will sell for around $900.
> Damper only is $600.
>
> The ATI damper is a rubber isolated damper in a steel shell. The timing
> marks are on the shell which is solid to the crank and cannot slip.
> Worked wonders for my TR6.
>
> Photo of installed damper attached. Two piece timing cover not included
> but available.
>
> Regards,
> Richard Good
> Good parts
>
> Chuck Arnold wrote:
>
>>Found a couple of websites that might help.
>>One has several dampers for the for 4-6 cyl engines:
>>http://www.bhjdynamics.com/index.php?main_page=index&cPath=6_39
>>
>>the other has mandrals that bolt to the damner and v-bely pullies that go
>>on
>>the mandrel
>>http://www.jonesracingproducts.com/csDh.html#frd
>>The secret is to find the correct sizes. Still probably a $700
>>proposition.
>>
>>Chuck
>>
>>On Feb 4, 2008 10:24 AM, Robert Lang <lang@isis.mit.edu> wrote:
>>
>>
>>
>>>On Mon, 4 Feb 2008, Chuck Arnold wrote:
>>>
>>>
>>>
>>>>bob,
>>>>did the ford part have a v-belt pulley, or is it just a damper with no
>>>>pulley?
>>>>
>>>>
>>>I never did see a part. But I suspect that is was just the dampener.
>>>
>>>All I can recall for detail was that it is some motor that is used in
>>>racing and the machinist implied that it was off the shelf. That's the
>>>key
>>>to making the part a lot less $$$$.
>>>
>>>I'll dig around and see what I can figure out. The machinist retired not
>>>long after we figured all this out.
>>>
>>>:-(
>>>
>>>I really liked working with that guy.
>>>
>>>rml
>>>
>>>---------------------------------------------------------------------------
>>>Bob Lang NER/SCCA | This space for rent
>>>Solo Chair 2008 TR6 40 F Prepared | Triumph!
>>>Voice:781-438-2568 FAX: 617-258-9535 | Cell: 339-927-4489
>>>
>>>---------------------------------------------------------------------------
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
> ATI Damper installed .JPG]
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|