Hi, a couple things:
I have a bunch of machinist items, including dial indicators, that I can
part with if any of you guys need anything.
Also, even as we speak (sorry Johnny) there is a TR6 Repair and Operation
Manual on e-bay. I have a a copy myself and it's very good. There's a good
section on how to check and adjust crankshaft end-float. It can be checked
in the car, but only be adjusted with the pan off.
Ted Schumacher gave me some pointers about end-float adjustment that were
very helpful. It's quite an important spec. Thanks, Ted.
I think Kaz may have covered the subject in his books, also.
Take care and stay warm.
Bill Tobin TR6 Erie, PA (Darned cold here!)
----- Original Message -----
From: "Mark J Bradakis" <mark@bradakis.com>
To: <fot@autox.team.net>
Sent: Saturday, January 19, 2008 9:17 PM
Subject: Re: [Fot] Measuring crank end float / main cap torque?
> I take it you don't have a dial indicator. If you're going to be
> putting together your own motors, I suggest the investment in
> a decent one will be worth it.
>
> mjb.
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|