Steve,
By a cheap V-8 header set from someone like Speedway or Summit.? A kit with all
the bent tubes in the diameter you need.? This way you can cut to get the bends
you need and weld it all together.
Chuck
-----Original Message-----
From: Gt6steve@aol.com
To: FOT@autox.team.net
Sent: Tue, 11 Dec 2007 12:58 pm
Subject: [Fot] Tubing for Triumph
Hey tube fetishists, I need some help on a couple things.
Firstly being hydraulic style tubing. Have you any thoughts on replacing the
braided steel lines running to my drysump tank with hard steel or aluminum
lines. I'm thinking the area in the cockpit can be cleaned up with hard lines.
I'm looking at two runs of 3/4 (-12) from the firewall in front of the driver
to the right rear of the passenger seat well.
Second search is for header tubing. Where do we buy the thinwall tube for
making headers? Just mils steel, I'll leave the Inconel to the experts.
Thanx in advance, Steve Smith
**************************************See AOL's top rated recipes
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
________________________________________________________________________
More new features than ever. Check out the new AOL Mail ! -
http://webmail.aol.com
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|