I don't know what the consensus was on the engine oil thread previously in
this group...
I was at the SEMA show last week and spoke to the Shell Answer person there,
he told me more than I could retain!!
Here is an email I got in reply to my inquiry on the rotella website to the
answer man (see last portion).
I would think that pertinent questions can be referred back to Richard Moore
at Shell...
Clark
Clark W. Nicholls
-----Original Message-----
From: AskShell@Shell.com [mailto:AskShell@Shell.com]
Sent: Monday, November 05, 2007 9:21 AM
To: cwnicholls@aol.com
Subject: RE: Rotella Ask Our Expert: Other
Clark, Rotella T with Triple Protection 15W-40 CJ-4 has approximately 1200
ppm zinc. This is 50% more zinc than current passenger car motor oils (API
SM/ILSAC GF-4) which contain approximately 800 ppm zinc. Passenger car motor
oils had approximately 1200 ppm zinc prior to 2001. In 2001 the zinc was
reduced to 1000 ppm and in 2005 reduced again to the current 800 ppm.
Thus, the new Rotella T with Triple Protection 15W-40 CJ-4 has the same zinc
content that passenger car motor oils had in 2000 before the current
problems with flat tappet engines began.
http://www.shellusserver.com/products/pdf/RotellaT(CJ-4).pdf
If you have any additional questions, please call us at 1-800-231-6950.
Thank you for your interest in Shell products.
Richard Moore
Staff Engineer
Shell Global Solutions (US) Inc.
Westhollow Technology Center, PO Box 4327, Houston, TX 77210, United States
of America
-----Original Message-----
From: cwnicholls@aol.com [mailto:cwnicholls@aol.com]
Sent: Sunday, November 04, 2007 8:24 AM
To: askshell, SLUBE-GSMR/5
Subject: Rotella Ask Our Expert: Other
------------------------------------------------
ROTELLA.com E-mail Form
------------------------------------------------
NAME Clark W. Nicholls
E-MAIL ADDRESS cwnicholls@aol.com
SUBJECT Other
COMMENTS
----------------------------------------------
I spoke with one of you at the SEMA show Friday in the final hour of the
show concerning Rotella and old British cars with flat tappet cams (brought
on by the change in chemicals in the oils, phosphorous, zink, etc). He
mentioned that there is information on this subject on the rotella website,
but I need help in finding this. I would like to pass this information on
to my Triumph compatriots ASAP as there is much discussion on this subject
in the Triumph automobile racing group.
----------------------------------------------
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|