Seems high to me too, but my Crane grind calls for .028 intake and .030 exh
hot. I was running less but when I adjusted to this the valve train quieted
down a lot .
----- Original Message -----
From: "David W. Riddle" <dave@microworks.net>
To: <fot@autox.team.net>
Sent: Friday, October 19, 2007 9:28 PM
Subject: Re: [Fot] ISKY "777"
> Isky website is showing no info available
>
> http://www.iskycams.com/makesearch.php?catid=127&engine_id=306
>
> But the online catalog for the TR-777 says:
>
> http://www.iskycams.com/onlinecatalog.html
>
> Intake 40-80
> Exhaust 80-40
> Valve Lift .480
> Valve Lash Hot .028
> Duration 300 degrees
>
>
> At 05:44 AM 10/19/2007, you wrote:
>>AMICI
>>
>> Does anyone have cam timing and spec info for the Iskenderian "777"
>>
>> Thanks
>> Dennis DeLap
>>_______________________________________________
>>http://www.team.net/donate.html
>>
>>dave@microworks.net
>>Fot mailing list
>>Fot@autox.team.net
>>http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> http://www.team.net/donate.html
>
> s.janzen@comcast.net
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|