fot
[Top] [All Lists]

Re: [Fot] TR3 bore sizes?, now Grose Jets

To: <FOT@autox.team.net>
Subject: Re: [Fot] TR3 bore sizes?, now Grose Jets
From: Tony Drews <tony@tonydrews.com>
Date: Thu, 30 Aug 2007 08:43:45 -0500
Grose jets (in racing, anyway) = bad news

In SU carburetors, they can't handle the vibration and fuel pressures 
racing requires in my experience.

- Tony Drews

At 07:43 AM 8/30/2007, Kramer, Robert wrote:
>Forgetting the liners for a moment what about the stuck Grose jets in
>TR6's?  I have seen that many times. I suspect its not the jets but rust
>in the fuel system sending unwanted particles forward, but I stopped
>using Grose jets a long time ago. What is the general consensus?
>
>
>Bob Kramer
>Sales Manager
>RDO Equipment Co.
>16415 North IH 35
>Pflugerville, TX 78660
>512-272-4141
>Fx 512-272-9365
>
>-----Original Message-----
>From: fot-bounces+rkramer=rdoequipment.com@autox.team.net
>[mailto:fot-bounces+rkramer=rdoequipment.com@autox.team.net] On Behalf
>Of A Daniel Cronin
>Sent: Wednesday, August 29, 2007 6:56 PM
>To: Bill Babcock; Mark J. Bradakis; FOT@autox.team.net
>Subject: Re: [Fot] TR3 bore sizes?
>
>Had an email comunication with Ken late last week to see if he had 92's
>and his response was that he did not due to difficulties with machining,
>etc.
>
>Bill Babcock <BillB@bnj.com> wrote:  Yup, Ken gillanders has nice flat
>top wisecos and sleeves from LA Sleeve. I'm going to use the 92mm in my
>street TR3.
>
>-----Original Message-----
>From: fot-bounces+billb=bnj.com@autox.team.net on behalf of Mark J.
>Bradakis
>Sent: Tue 8/28/2007 9:00 PM
>To: FOT@autox.team.net
>Subject: [Fot] TR3 bore sizes?
>
>So this local club member brings in his TR6 for some work (stuck Grose
>Jet in rear carb) and we start talking about his TR3 project.
>
>Can 89 mm piston sets be had that will make a reliable, streetable
>motor?
>
>mjb.
>billb@bnj.com
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>adcronin@ameritech.net
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>
>
>Planning & Development Services
>A. Daniel Cronin
>248 761-2673
>rkramer@rdoequipment.com
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>_______________________________________________
>http://www.team.net/donate.html
>
>tony@tonydrews.com
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Fot] TR3 bore sizes?, now Grose Jets, Tony Drews <=