Greg,
I changed the holes where the upper ball joint attaches to the arms -- moved
them in a quarter inch, got lots of camber. Needed to do this because
previous owner had welded in the lower brackets. My fix works fine, but the
inner hole is a little sloppy as it is on the diagonal surface of the a-arm.
On 8/22/07, Greg Lunker Hilyer <lunkercars@earthlink.net> wrote:
>
> Begin forwarded message:
>
> > From: "Greg \"Lunker\" Hilyer" <lunkercars@earthlink.net>
> > Date: August 22, 2007 10:25:22 AM MDT
> > To: "David W. Riddle" <dave@microworks.net>
> > Cc: "wheeltowheel@wheeltowheel.com"
> > <wheeltowheel@wheeltowheel.com>, fot@autox.team.net
> > Subject: [Fot] Sandia Race Report and TR4 camber adjustment
> >
> > Nice to meet you and Tyler and thanks for the Triumphfest poster
> > [have fun in Laughlin!]. Hope you had enough fun to come again.
> > Bring your TR3 next time! I hope to make one of your events over
> > the winter.
> > After her little off-track excursion earlier in the month, Connie
> > got back in the TR4 on Saturday and now has her competition
> > license. I drove it Sunday and after killing two tires in two
> > sessions, realized that something is amuck up front. Managed a 3rd
> > but was down nearly 2 seconds a lap. Along with a fix will
> > [finally] come some camber adjustment. Seems that most methods of
> > camber adjustment are carried out at the lower a-arm bracket but I
> > am thinking of slotting the top of the shock tower instead -
> > Thoughts or advice anyone?
> > Greg "Lunker" Hilyer
> > TR4 #314
> > Albuquerque NM
> > On Aug 14, 2007, at 3:38 AM, David W. Riddle wrote:
> >
> >> This past weekend (8/10-8/12) Tyler and I made the six hour trek from
> >> Mesa to Albuquerque to run at Sandia Motorsports Park.
> _______________________________________________
> http://www.team.net/donate.html
>
> triosan@gmail.com
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
--
Chuck Arnold
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|