Oops, that's the part number for conventional rings, the gapless ring is
T9416. For 89mm use T2675-1. These are for pistons with 1.5/1.5/4.0 mm
gaps.
Larry Young wrote:
> I've used Total Seal rings on my 87mm TR4 motor, but not enought to
> get a fair reading of their value. The part no. is CR9416. You can
> also get them off the shelf for 89mm, but I'd have to look up that
> part number.
> Larry Young
>
>> Subject: Re: [Fot] gapless rings
>>
>> I didn't know these were available for Triumphs.
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|