I just did a Driving 101: Learning New Tracks article on my blog that
some of you might find useful www.allaluminumtour.com
Any comments, corrections and opinions are welcome.
Bill Babcock
billb@bnj.com
bnj Website for Babcock & Jenkins, a direct and interactive agency
You can subscribe to my Blogs
Via email:
All Aluminum Tour: Touring and racing classic North American tracks.
http://www.feedblitz.com/f/?Sub=168395
Ponohouse : Living and playing in Maui. http://www.feedblitz.com/f/?
Sub=168304
or Via RSS
Ponohouse: http://feeds.feedburner.com/PonoHouse
AllAluminumTour: http://feeds.feedburner.com/AllAluminumTour
On Apr 29, 2007, at 8:40 AM, PegAndBobM@aol.com wrote:
> Well can't say I had not been warned, but last week I broke a
> front hub.
> The front left wheel, still bolted to the hub plate beat me to
> turn 5 at La
> Junta. Come to think I never made it to turn 5. Anyways...I need
> a source for
> competition hubs for a TR3 A, a rotor(or set of competition
> rotors) and at
> least a good front fender. I have not unloaded it yet so don't
> know what else
> may be broke, but a quick inspection at the track looked like I
> came down
> on the rotor and rode it to the a stop. The wheel ripped the
> front the fender
> off at the rear and a lot of black rubber is on the driver door,
> so may need
> a left door skin also.
> Would appreciate any assistance and advice. I can be contacted
> directly at
> (303) 841-7418, or email _pegandbobm@aol.com_
> (mailto:pegandbobm@aol.com)
> Thanks
> Bob Miller
>
>
>
> www.aol.com.
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|