Sending a reply to the whole group. Photo will not come thru, but if you
want it let me know. Cable came from Pegasus Racing.
---------- Forwarded message ----------
From: Chuck Arnold <triosan@gmail.com>
Date: Mar 15, 2007 11:55 AM
Subject: Re: [Fot] Accelerator Cable Connection to Triple Webers
To: Allen Washatko <awashatko@wi.rr.com>
I made a bracket that screwed into the two treaded holes at the side of the
middle carb. Put a hole in the middle of the bracket, and secured the end
of the cable to both sides of the bracket. See picute.
On 3/15/07, Allen Washatko <awashatko@wi.rr.com> wrote:
>
> FoT,
>
> I'm converting my throttle linkage on the TR6 race car to a cable and
> am looking for a piece to connect the cable at the Weber end of the
> set-up. Most everything that I have seen is designed for only two
> Webers. Anybody have any ideas or sources?
>
> Thanks,
>
> Allen
>
> A l l e n W a s h a t k o
> 1971 TR6 - Number 6
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
--
Chuck Arnold
--
Chuck Arnold
[demime 1.01d removed an attachment of type image/jpeg which had a name of
throttle cable at carb 1.JPG]
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|