Tony,
I also have a modified TR-6 with an American V-type engine. My car is
powered by a pumped-up Buick V6. I intentionally chose the short V6 instead of
a longer V8 to avoid interference with the rack and pinion steering and the
TR-6's stock front cross member.
I am an autocrosser so I was also very concerned about the assembled weight
of American V8 engines, and chose the Buick bent six because with an aluminum
intake manifold it only weighs about 400 pounds assembled. If your customer
must have the heavier roughly 600 pound Ford V8 engine I would suggest that the
foot well modifications required to move the engine rearward will be quickly
repaid by the improved balance of the finished car.
Hopefully your customer is also considering how to address the added stress
that a large displacement American V-type engine will apply to the chassis and
drive train. My Buick V6 powered TR-6 required a chassis brace / roll cage
sub-assembly before it would accelerate straight after a hard up-shift. The
231 cubic inch engine I installed also required stronger components for the
drive shaft, differential, half-shafts, rear suspension, and rear stub axles
before it could make effective use of the power that a pumped-up Buick V6 can
deliver.
Regards,
Jim Prettyleaf
TONY VIGLIOTTI <tony@rat-co.com> wrote:
13 DECEMBER 2006
Hello One and All,
Does anyone out there have any experience with moving the stock TR6
steering rack forward by 1/2 inch. I have a customer who is placing a Ford 302
V8 in his TR6 and wants me to move the rack for clearance of the fan pulley.
My concern is what will it do the bump steer equation and if I move it, should
I lower or raise it??
Regards,
Tony Vigliotti
RATCO Inc.
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
---------------------------------
Need a quick answer? Get one in minutes from people who know. Ask your question
on Yahoo! Answers.
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|