Full-Commercial Message:
I installed the kit last week along with some bronze bushings I had made for
the front spring eye; it's quick and easy to install. It's probably nothing
like adding a panhard rod but I think this is a poor (or lazy) mans option
to tighten things up a bit at the rear. I'll be testing it at the SCCA
Vintage grid at Bremerton Raceway in 3 weeks.
Mark
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of N197TR4@cs.com
Sent: Saturday, July 01, 2006 11:13 AM
To: fot@autox.team.net
Subject: [FOT] Rear Spring and Shackle Bushing Kit
Semi-Commercial Message:
Fifteen years ago, I came up with bushing kit made of brass. In building my
TR project, I put together another kit with some improvements.
I sent one to Mark York for his use, and now wonder if others might be
interested. If you guys are interested, I might go to the street guys next.
I have a picture of the kit, if you want to see it.
I can produce and assemble the kit in volume for about $30 per kit. It
would
take about 25 kits to make it worthwhile to go through the exercise, once,
but I would do it and perhaps be ready to ship by September.
Whaddya think?
Joe (A)
|