I don't seem to have all the bits either--I'm one bolt and lot of the
washers short. I'm using the standard (not aluminum) pan. Can I get a set of
washers from you quickly?
Bill Babcock
2345 NW Amberbrook Dr
Beaverton, OR 97006
If you have them, send them fedex and I'll pay the shipping.
Bill
-----Original Message-----
From: owner-fot@autox.team.net
To: ''FOT' '
Sent: 5/18/2005 3:56 PM
Subject: Slicone gaskets--Atten: J Wagner
I've pretty much found my oil leak, the sump gasket was soaked with oil
at
the front of the pan. It's NOT a silicone one--I decided I needed the
ground
clearance under the pan.
Back to silicone.
I have a silicone gasket, and I have the safety wire instructions, but I
don't have the gasket instructions. Justin, can you tell me what to
torque
the pan to.
|