Put two screw drivers into the cage one opposite to the other and rest them
on the housing. Use the lever action to pull the cage out.
----- Original Message -----
From: "Bill Babcock" <BillB@bnj.com>
To: <fot@Autox.Team.Net>
Sent: Sunday, November 28, 2004 2:25 AM
Subject: Diff Woes
> I'm trying to pull my differential from the housing. In the past I've been
> able to do this without the factory spreader--it just takes some wiggling
> and patience. But this time it won't come out. I suspect that when Mr.
> Yarwood stuck my new LSD in he shimmed it tighter than I usually do. I
made
> a homemade spreader and tried that, but no go. All I can get it to do is
> shift a tiny bit, and that after I looped a cable behind the diff and set
up
> a lever contraption to put a mighty tug on it. Any ideas?
|