I use a old fashion design as you can see on that picture. It was taken from a
TR2 model.
Chris Marx
----- Original Message -----
From: <alfetta95@optonline.net>
To: <fot@Autox.Team.Net>
Sent: Friday, October 22, 2004 4:40 PM
Subject: re: 50 series tires
> My 2 cents.
>
> I have to run 14x6 rims in SCCA ITB with the Alfa, (Sorry guys!) I run the
Hoosier R3S04's. I've tried 205-55-14 and 225 50-14. Both sizes are a real
bitch to get on the 6" rim due to sidewall stiffness. My times are at least 1
second a lap faster with the 225-50-14. This 1 second a lap was on the long
course at Pocono. Lime Rock I gained about .5 seconds. The Hoosier sales rep
said the same to me that Goodyear said to Mr. Kastner. But I don't think the
time clock lies! If body clearance is a problem a possible solution is a
wheel with a slightly different offset.
>
> TR3A Quick update:
> Gussets have been welded to the frame, New floor boards are in. Just
finishing up the other minor inner body repairs. Next step: Sandblasting and
Roll cage design. Any ideas?
>
> Todd Redmond
[demime 0.99d.1 removed an attachment of type image/jpeg which had a name of
Colmar6.jpg]
|