Oh, c'mon Mordy. Let's shake up the list a bit more than that. Half
the folks are working every night getting ready for the VIR race. : )
Mordy and I are interested in feedback both negative and positive from
anyone using the Moss Motors Alloy TR3/4 head in either street or race
applications.
Specifically if there are any head gasket sealing problems that should
be addressed.
The head has been on the market for some years in the UK, but it's
difficult getting usable feedback from that market. I spent about 6
months looking for feedback before being comfortable bringing the head
to market in the US, but the information I was able to collect at that
time was still pretty vague.
Your input is appreciated to ensure that the product is developed the
way it should be.
Thanks
Kelvin Dodd
Moss Motors, Ltd.
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
Behalf Of mordy dunst/ gasket works
Sent: Wednesday, June 02, 2004 5:28 PM
To: fot@autox.team.net
Subject: alum head
Any experience (s) with the Aluminum TR3/4 head?
M. Dunst
Gasket Works USA, LLC
626.358.1616 voice (GMT - 8)
626.357.9490 fax
www.headgasket.com
|