While on this subject:
Do any Triumph IRS folks need some spare hubs? I have a couple.
Differentials, too.
Contact off list.
N197tr4@cs.com
------------------------------------------------------------------------------
-------------
I think what you have is where the inner bearing has worn a grove in the
spacer. The inner part of
the bearing has been turning against the spacer. I replace these in the hubs
I rebuild. Also check
that the stub axle is not worn enough that the bearing will not fit tight on
the stub axle. You don't
want the bearing center turning on the axle. I find these spacers worn in
about half the hubs
that I rebuild. They are available from several suppliers.
Dean
Tetterton
Joe (A)
|