Brad,
Grinding the journals down is not that difficult, however itwill require a
re-case hardening of the cam and it may be more reasonable in cost to just
find a small journal cam. I have several of them, but there are certain
variations which allow for a larger lift to be ground on them, and none of
mine are that variation.
What is the hesitation to use the Paeco cam?
Aaron Johnson
#38 F-Prod Spit MkIV Oregon Region SCCA
http://www.geocities.com/spitracer9
>Original Message:
>-----------------
>From: Brad Kahler brad.kahler@141.com
>Date: Thu, 11 Sep 2003 06:20:07 -0600
>To: fot@autox.team.net
>Subject: grinding cam journals
>
>
>Amici,
>
>While looking through our pile of good cam cores for Susan's spitfire we
>have found we have a lot of the large journal cams that were used in the
>mk1/2 and 1500 spitfires.
>
>I know it is technically feasible to turn the journals down. We have a
>Paeco cam in the box that was originally a mk1 cam that has had the
>journals turned to match the small journal cam. However since its a Paeco
>cam we aren't going to use it.
>
>Susan talked with Iskey yesterday and they said they could do it but
>apparently they have had very few requests to do so.
>
>Myself, I can't see any technical reason not to turn cam journals down.
>However I'd feel more comfortable doing so knowing that others have done it
>or would recommend it.
>
>Thanks
>
>Brad
>1957 TR3 vintage racer
>
>--------------------------------------------------------------------
>mail2web - Check your email from the web at
>http://mail2web.com/ .
_________________________________________________________________
Send and receive larger attachments with Hotmail Extra Storage.
|