>I need a new radiator and want the best, but those are very
>pricey and that previous comment has me wondering.
McCulloch Radiators in Az will custom fabricate alloy rads. $350 all said
and done (including
all mounting points). http://www.alumrad.com/
Yes, they are fragile and the fins bend *very* easily, so you will need to
be very careful when
working on the backside of the radiator, and use a fine mesh up front to
catch anything larger than
a fly. However, I was able to compare it back-to-back with a newly re-cored
stock radiator
in my TR6, and did note that the thermostat was open for a much shorter time
with the alloy rad
than the steel.
YMMV.
Shane Ingate in Maryland
_________________________________________________________________
|