British Parts NW has hardened lifters for 56.00 a set!
I've used 2 sets and work great and no abnormal wear. One cam has about 30
race hrs on it and looks great!
John Wilkins
"66 Triumph Spitfire #892
----- Original Message -----
From: "A.J. & C. Wood" <wood@dandrade.freeserve.co.uk>
To: <fot@autox.team.net>
Sent: Friday, March 21, 2003 11:21 AM
Subject: TR-6 Lifters
> I have OEM lifters, nitride hardened, at circa $170 a set. These are not
> modified in any other way.
> Slightly less than PRI at $360 a set....
> Jon Wood Classic Racecraft ----- Original Message -----
> From: "Mike Munson" <fasttrs@mindspring.com>
> To: <fot@autox.team.net>
> Sent: Friday, March 21, 2003 12:45 PM
>
>
> > Amici,
> >
> >
> >
> > Does anyone have a source for good hard lifters for a TR6? What hardness
> > is recommended? I had some bad ones that wiped out a cam and want to be
> > sure I replace them with good ones.
> >
> >
> >
> > Mike Munson
> >
> > Snellville, Ga.
|