I have OEM lifters, nitride hardened, at circa $170 a set. These are not
modified in any other way.
Slightly less than PRI at $360 a set....
Jon Wood Classic Racecraft ----- Original Message -----
From: "Mike Munson" <fasttrs@mindspring.com>
To: <fot@autox.team.net>
Sent: Friday, March 21, 2003 12:45 PM
> Amici,
>
>
>
> Does anyone have a source for good hard lifters for a TR6? What hardness
> is recommended? I had some bad ones that wiped out a cam and want to be
> sure I replace them with good ones.
>
>
>
> Mike Munson
>
> Snellville, Ga.
|