Rear Axle Casing Repair Question

["Steve Benford Jr." <sbracing@execpc.com>]

Amici:

I was stripping down my rear axle this weekend and found out that one 
of the axle casing tubes is coming loose.  The three retaining pins are 
loose in the center casing and the tube is only moving in rotation 
about 5 degrees total.  The tube is not moving in and out of the center 
casing.  Can the center casing holes and the tube holes be enlarged and 
the retaining pins replaced with larger diameter pins?

Thumbs Up
Steve Benford Jr.