a hard pedal but no brakes is usually due to soft material in the pads.
bruce
----- Original Message -----
From: "Mike Munson" <fasttrs@mindspring.com>
To: <WEmery7451@aol.com>; <fot@autox.team.net>
Sent: Thursday, March 13, 2003 5:14 AM
Subject: RE: Brake stuff
> If you will be racing the car and generating REAL heat stay away from
> silicone fluid. I have lost my brakes several times (hard pedal but no
> brakes) and was told by several SCCA racers that know their stuff that
> silicone gels under extreme heat. I learned the hard way.
>
> Mike Munson
>
> -----Original Message-----
> From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On
> Behalf Of WEmery7451@aol.com
> Sent: Wednesday, March 12, 2003 11:41 PM
> To: BillB@bnj.com; timmurph@execpc.com
> Cc: robertallred@aros.net; mjb@autox.team.net; fot@autox.team.net
> Subject: Re: Brake stuff
>
> In a message dated 3/12/03 6:24:31 PM Pacific Standard Time,
> BillB@bnj.com
> writes:
>
> << What I really meant was that Silicon brake fluid sucks. I've never
> heard
> any racer have a good thing to say about it except that it stays very
> clean.
> >>
> From a recent Western PA TR Club technical brake seminar, Jack Wheeler
> used
> silicon brake fluid and recommended it to others. It is harder to
> effectively bleed the brakes using silicon brake fluid. I was always
> afraid
> to try it, and the Castrol fluid seems to work for me. Once during my
> earlier years, I used American brake fluid, and dissolved every seal in
> the
> system. I am not sure if the rebuild kits are still sensitive to
> American
> made brake fluid, or not.
|