In front, I'm measuring to the bottom of the frame rail near the front cross
member. In the rear, I'm measuring to the bottom of the frame rail just
before it starts to kick up. I'm running 5.50x15 Hoosiers, which appear to be
just shy of 24" diameter. From drawings in the manual, it appears that the
car has been lowered about 1/2" or so. I've been using using Front Suspension
Geometry Pro to help figure this out, but I'm finding that the results are
extremely sensitive to the measurements, so I've been using direct
measurements too.
"Michael D. Porter" wrote:
>
> I can't give you a definitive answer on rear height, but others will
> tell you what there's is, if you'll ask for a specific point on the
> frame rails to measure. Also, the height of the rear rails is greatly
> dependent upon the tire size you're running at the rear, so you should
> take that into consideration.
|