Mordy-Goop resides on my last head installation.
Learned something about head sealing last engine build. Discovered some very
small imperfections and burrs on the top of the cylinder liner after two
attempts to effect a seal. Dressed the tops of the cylinder liners and no
more trouble. Never had this happen before. Never checked it before. Found
when I used titanium scraper to remove old sealant and saw some shiny spots
where there should be none.
Joe (A)
> Try out the head gasket spray that Mordy sells through Gasket-Works. Good
> stuff especially formulated to seal. Goes a step beyond the silver paint,
> etc...
> Steve
|