Would you mind explaining what you did again I am interested in bring my
pipe threw the rocker pannel by passing it threw the frame but I can't
understand what you did< also where and at what hight does the pipe exite
from under the car ? whats the aprox. lenght of your pipe from header to
exit ? thanks rob
----- Original Message -----
From: <WEmery7451@aol.com>
To: <kaskas@earthlink.net>; <RJunkermei@aol.com>; <fot@autox.team.net>
Sent: Wednesday, December 12, 2001 12:16 AM
Subject: Re: exhaust size
> In a message dated 12/11/01 12:05:09 PM Pacific Standard Time,
> kaskas@earthlink.net writes:
>
> << Having the exhaust pipe come loose and be black flagged. >>
>
> I was continuously losing exhaust pipes when they were run out of the side
of
> the car. I finally took a piece of semi-flex pipe, bent it slightly to
the
> left, and then to the right until it was aimed towards the frame cross
> member. A straight pipe was then clamped onto the flex pipe to run
through
> the frame member, and to use the original clamp.
>
> A piece of strap metal was welded across the exit side of the frame X.
Two
> holes were drilled in the strap metal, and an exhaust pipe clamp holds the
> second section of pipe to this metal. This maneuver ended the problem of
> ripped off exhaust pipes.
>
> The fuel cell sits in the trunk with the empty spare tire cavity between
the
> end of the pipe and the fuel cell.
|