If you don't care about originality, but rather just meeting the GCR for
62 or thereabouts, you can mount any radiator that uses the original
mounts. That leaves a lot of room. I had an outfit here in Portland make
me a huge radiator that bolted to the mounts and fills just about the
entire nose. Cost me $200, and my biggest challenge after fitting it was
keeping the cooling under control--had to fit a thermostat to keep the
temp up and fiddle with the optimal number of bypass holes to keep from
sending huge slugs of cold water into the block. I wound up blocking 1/3
of the rad except on the hottest days.
-----Original Message-----
From: Rob Dardano [mailto:19to1tr6@mediaone.net]
Sent: Monday, July 02, 2001 3:43 PM
To: team
Subject: Cooling
I am not sure who started all the radator stuff but I got lucky in
Brockton I
had my stock Tr-6 recored to a 4 row for $ 250.00 and was done in two
days .
he also saved the stock core It was an easy out I hardly felt it
rob
KOHL RADIATOR>> Brockton Ma. 508-586-0071
|