Mordy Dunst wrote:
>
> I need to make bushings for my car as well. I have urethane but, the
> durometer is too soft. It's probably ok for street. I rec. delrin. You
> can log onto www.macmastercarr.com and search for delrin. You can get just
> about whatever stock you need there. They will ups it to you.
Mordy and all--look for Delrin AF (McMaster-Carr has it, or had a few
years ago). The AF indicates "Added Fluorocarbon," i.e., it's got some
Teflon in it, which should help with squeaks.
Cheers.
--
Michael D. Porter
Roswell, NM (yes, _that_ Roswell)
[mailto:mporter@zianet.com]
`70 GT6+ (being refurbished, slowly)
`72 GT6 Mk. III (organ donor)
`72 GT6 Mk. III (daily driver)
`64 TR4 (awaiting intensive care)
`80 TR7 (3.8 liter Buick-powered)
`86 Nissan 300ZX (the minimal-maintenance road car)
`68 VW Type II Camper (Lancia twin-cam powered, but feeling its age....)
Remember: Math and alcohol do not mix... do not drink and derive.
|