fot
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: water pump speeds

from [WEmery7451] [Permanent Link][Original]
To: mattspit@att.net, fot@autox.team.net
Subject: Re: water pump speeds
From: WEmery7451@aol.com
Date: Wed, 25 Apr 2001 10:18:11 EDT 
In a message dated 4/25/01 6:48:18 AM Pacific Daylight Time, mattspit@att.net 
writes:

<< I have been trying to find aluminum Gilmore pulleys with little success.
 I have found one from Moroso and some in cast iron.
 Does anyone know of a source for these?
 I would like them to be about 3"" and 6" in diameter.
  >>

This was going to be my question.  I put in on the Internet various 
combinations of Gilmore from Kas's suggestion.  The following has been my 
closest hit, which lists Gilmore pulleys:

http://members.aol.com/MrFord351/
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: water pump speeds, matt matthews
Next by Date:  Re: water pump speeds, Henry Frye
Previous by Thread:  Re: water pump speeds, matt matthews
Next by Thread:  Re: water pump speeds, Henry Frye
Indexes:  [Date] [Thread] [Top] [All Lists]