fot
[Top] [All Lists]

Roll Bar Pickup Points

To: fot@autox.team.net
Subject: Roll Bar Pickup Points
From: Henry Frye <thefryes@iconn.net>
Date: Fri, 19 May 2000 11:45:55 -0400
Greetings,

The '62 TR4 race car is looking pretty bare. It's amazing what a couple 
hours with a sawsall and a grinder will do. The old roll bar is off.

Monday morning I take the car to a local fabricator to get the new cage 
built and installed. We are doing the main hoop, two legs dropping back to 
the wheel arches, crossbar between the two legs for the harness, and two 
side intrusion bars on each side terminating at a cowl hoop.

The fabricator is concerned about where to pick up the frame for the cowl 
hoop. The body is bolted to an outrigger at the base of the A-post. The 
frame runs inboard several inches.

Is it kosher to use the outrigger as the pick up point? Any modifications 
needed to the outrigger to beef things up? Or do we weld some plates to the 
frame extending things outboard and go from there? If anyone has some 
digital pictures they are willing to send, that would be quite helpful as well.

As always, thanks a bunch.

My ISP has decided that Mark's server name has changed, so please be sure 
to reply to me personally and to fot@autox.team.net

Thanks Mark for the fast answer to my problem!

Henry Frye thefryes@iconn.net
http://members.iconn.net/~thefryes/amici.html
Yellow TR4







<Prev in Thread] Current Thread [Next in Thread>