Shouldn't be too surprising--you're mostly interested in the temperature of
the oil as it comes off the parts, not the efficiency of your oil cooler.
That's where I measure it, and it's where my handbook of data logging says
to (an old ASTME book that I've been pulling my library apart trying to
find.)
-----Original Message-----
From: WEmery7451@aol.com [mailto:WEmery7451@aol.com]
Sent: Monday, March 20, 2000 7:38 PM
To: Gt6steve@aol.com; fot@autox.team.net
Subject: Re: Oil temp and sender location
Most people to my surprise seem to measure the oil temperature in the sump.
I am also in the process of adding an oil temperature gage and sender, and
will be interested to see other responses on this subject.
|