We have new oil cooler adapter plates in stock . They are machined out of
Aluminum billet and route the oil past the pressure relief valve and thru
the filter before it goes thru the cooler. This prevents pressure surges
when the oil is cold from blowing the cooler seams. The passages are
drilled and tapped for tapered pipe threads to accept adapters for AN-10
lines with no restriction. These plates are available for TR-2 thru 4..
Regards,
Greg Solow
The Engine Room
Santa Cruz, Ca.
831-429-1800
-----Original Message-----
From: Gukedad@aol.com <Gukedad@aol.com>
To: vintage-race@Autox.Team.Net <vintage-race@Autox.Team.Net>
Date: Saturday, January 09, 1999 8:09 PM
Subject: TR oil cooler-wanted
>Does anyone have a TR2-4 oil cooler adapter they want to part with? Thanks
.
>
>Bill
>
|