On Mon, 19 Oct 1998, Alexander Joseph H wrote:
> I'll keep it simple:
>
>
> * Are all brake calipers interchangeable through TR2-TR6? I know there
> are different configurations, but perhaps they mount the same.
TR3 - Early TR6, around CC30000 use the same Girling 16 caliper. After
that, the TR6 has the 16P and very late TR6's have the 16PB. The pistons
on the 16 have a thin lip for the weather seal, and are not interchangable
with the later type. The designation MP has metric threads for the brake
lines.
> * Core Question....What would a good price be for "core" calipers
> suitable for complete rebuild...without sleeving? Pistons/seals/cleanup and
> paint.
Chuck R. asks $45 for the core on these puppies. Figure half that from
the other sources.
> * Rebuilt Question...What would be a good price range for rebuilt TR6
> calipers that have not been used since rebuild, nicely painted and sitting
> on the shelf.
100 bucks from TRF, I think apple gets $45 plus the cost of the new
pistons, so it comes out to around $100 per caliper.
> Rather sell the cores because I want the rebuilt ones for back up to TR4
> racer, but might consider it.
????
> Thanks,
>
> Joe
later
rml
-------------------------------------------------------------------------------
Bob Lang Room N42-140Q | This space for rent.
Consultant MIT Computer Services |
Voice: (617)253-7438 FAX: (617)258-9535 |
-------------------------------------------------------------------------------
|