datsun-roadsters
[Top] [All Lists]

Re: [Roadsters] possible to mod a 69 1600 type 2 dash harness to go

To: Bill Cole <datrock@centurytel.net>, datsun-roadsters@autox.team.net
Subject: Re: [Roadsters] possible to mod a 69 1600 type 2 dash harness to go
From: Gary and Cindy Ault <aultgc@att.net>
Date: Tue, 14 Feb 2012 10:44:31 -0800 (PST)
Bill,

My reaction was exactly the same as yours.  Then I realized "Wait, the
temp 
sensors are part of the engine harness..."     ;-)

When I put a '69
2000 engine into my '66 1600 years ago, all I had to change 
electrically in
the engine bay was the wire to the temp sensor,  and I had to 
make a jumper
harness to connect the 2000 alternator (on the lower left of the 
motor) with
the alternator connection for the 1600.  But, I subsequently bought 
the
factory parts and moved the alternator to the upper right as on '67-1/2
2000s.

Gary




________________________________
From: Bill Cole
<datrock@centurytel.net>
To: datsun-roadsters@autox.team.net
Sent: Tue,
February 14, 2012 11:21:14 AM
Subject: Re: [Roadsters] possible to mod a 69
1600 type 2 dash harness to go in 
a 69 type 2 2000?

Hi Craig, I believe
you'll find the temp sensor wire on the 1600 and  2000 are 
located in
different locations in the harness, the 1600 comes out of the engine 
harness
near the carbs and the 2000 it comes out of the fire wall on the 
passenger
side..there maybe more issues but that is one that I have came across 
doing
the same ting your planning to do... Bill
________________________________________

datsun-roadsters@autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/aultgc@att.net
________________________________________

datsun-roadsters@autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums


<Prev in Thread] Current Thread [Next in Thread>