I've got a set of calipers which were pulled from the race car. They were
working well when pulled. I'll sell them for $50 per piston or $100 per
assembly. The piston hanger has been modified so that it will slip under 13"
wheels. The bolt holes were slotted so that the assembly will slide closer to
the hub. I also have the rotors which were turned down so that the calipers
could slide in farther. I'll sell the rotors for $100 for the pair. They will
work nicely if you are going to do the Volvo caliper swap. I also have a 200SX
parts car. The rear disc brakes are a popular swap into roadsters. I'll sell
the rear brakes for $100. Bring a trailer and that $100 gets you the rest of
the car if you want it.
Andy
----- Original Message -----
From: "JH Bahn" <jh.bahn@verizon.net>
To: "Mike Harris" <harris_seq@yahoo.com>, datsun-roadsters@autox.team.net
Sent: Wednesday, December 23, 2009 10:11:20 AM GMT -06:00 US/Canada Central
Subject: [Roadsters] Calipers
The needle is fragile and is susceptible to bending and binding - handle
carefully. also, be extremely cautious blowing the piston out with
compressed air - if it is sticking or a little corroded or rusty it can come
lying out with extreme force. Even if it doesn't hit you, it will ricochet
----- Original Message -----
From: "Mike Harris" <harris_seq@yahoo.com>
To: <datsun-roadsters@autox.team.net>
Sent: Tuesday, December 22, 2009 1:04 PM
Subject: [Roadsters] Front Calipers
> Re: Caliper location, the calipers piston housing has different size (in
> depth) threaded areas for the brake lines. The inside piston will have the
> bleed screw up (or a deep threaded hole for the bleed screw and ball) the
> outside piston deep hole will face down. Your lines will tell you the
> correct location if you get lost, (deep holes for bubble flare or bleeder
> screw other holes take inverted flare) it doesn't matter the piston
> location as long as you have them turned right to accept the lines.
> Also I think the needle is is to keep the piston from returning all the
> way as the brake pads wear, someone else may know this for sure.
> Hope this helps
> ________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as vze3bsfc@verizon.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters
You are subscribed as andycost@embarqmail.com
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
________________________________________
Support Team.Net http://www.team.net/donate.html
Datsun-roadsters mailing list
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/datsun-roadsters
|