Yes, Graeme, the starter is still mounted up.
Sounds from your description that the screws are not going to be readily
accessible.
So, sounds like a starter R&R, following which I could use the drawings.
Thanks.
- Bob
Graeme wrote:
>Subject: Q: How easily is the solenoid removed from the starter?
>Can anyone who has done this tell me how, and how easily, is the solenoid
>removed from the starter? Any tips or tricks?
>
>The solenoid has screws holding the main switch assy. to the cast front
>bracket, the bit that bolts to the engine.
>310s have 2, 311s have 3 I think.
>Don't like your chances of getting these out if the starter is mounted on
>the engine still.
>When these are out, the switch needs to be disengaged from the shift lever
>assy which operates the bendix drive gear.
>There are a few gaskets/spacers involved so make sure you don't trash them.
>I can send you some pics. Of the parts breakdown if you want.
|