Thank You Phill.
This is exactly the info I needed.
Thanks
Dan Zubkoff
San Mateo, CA
--- Phill Brook <fairlady@bigpond.com> wrote:
> Dan,
> the part number for the PL410 is 46010-10600 but
> according to the parts book it has the fluid pipe at
> the front of the cylinder.
>
> 46010 indicates a Brake Master Cylinder assembly for
> all models.
>
> There are several different types of PL411. The
> part/model numbers are as follows:
> PL411-U = 170 or 187
> PL411-UT = 171
> PL411-UTK = 173
> PL411UX = 250
> PL411UTX = 253
>
> You can try part number 46010-xxx00 where xxx = any
> of the 6 model numbers above. I'd recommend trying
> 46010-17000 first.
>
> Don't worry too much if the last 2 digits are
> different (they could even be letters) as that is
> just a variation from the original. It could mean a
> different supplier or an updated design or
> engineering spec.
>
> Regards,
> Phill Brook
> www.users.bigpond.com/fairlady
|